CMC 1 U
$1,535.00 + gst
To enquire about this product - click here
The CMC 1 is a small Colette microphone amplifier, about one-third the length and 53% lighter than the CMC 6. It is compatible with all components of the Colette system and can be used in place of the CMC 6 without compromise, for all applications in which the size and weight of the microphone play a role.
At Schoeps, “uncompromising miniaturization” means that the electrical characteristics of the CMC 1 are equal to, or even better than, those of the CMC 6.
The CMC 1 offers very high immunity from RF interference with the Schoeps RFI Shield; high immunity to cable-induced hum and other interference (field tested with Audio Limited A 10, etc.)
A complete Colette-series microphone consists of an MK capsule and a CMC amplifier. All capsules and active accessories of the Colette system are compatible with the CMC 1.
Tech Specs:
Frequency range : 20 Hz-20 kHz
Sensitivity see corresponding capsule
Maximum output voltage : 1.8 V (5 dbV) with1 kΩ load
Maximum sound pressure level : (THD < 0.5 %) 135 dB-SPL (P48) with MK 4 & 131 dB-SPL (P12) with MK 4
Low cut filter : 20 Hz, 12 dB/oct
Output impedance : 50 Ω +/- 1 Ω (8 Hz - 50 kHz)
Minimum recommended load impedance : 1 kΩ
Common mode rejection ratio (at 1 kHz) : > 55 dB
Maximum cable length : > 400 m (~1.300 ft)
Schoeps RFI Shield : Yes
Powering standard / Valid range : P48 / 30-52 V & P12 / 11-13 V
Current consumption : 2 mA (P48) & 3 mA (P12)
Output : XLR-3M, analog, 1 channel
Length : 36 mm / ~1.4"
Diameter : 20 mm / 0.8"
Weight : 36 g / 1.3 oz
Surface finish : Matte Grey
Custom colour : Chromagreen, Smoked Silver (Additional Fee + Longer Lead Time)
$1,535.00 + gst
To enquire about this product - click here
The CMC 1 is a small Colette microphone amplifier, about one-third the length and 53% lighter than the CMC 6. It is compatible with all components of the Colette system and can be used in place of the CMC 6 without compromise, for all applications in which the size and weight of the microphone play a role.
At Schoeps, “uncompromising miniaturization” means that the electrical characteristics of the CMC 1 are equal to, or even better than, those of the CMC 6.
The CMC 1 offers very high immunity from RF interference with the Schoeps RFI Shield; high immunity to cable-induced hum and other interference (field tested with Audio Limited A 10, etc.)
A complete Colette-series microphone consists of an MK capsule and a CMC amplifier. All capsules and active accessories of the Colette system are compatible with the CMC 1.
Tech Specs:
Frequency range : 20 Hz-20 kHz
Sensitivity see corresponding capsule
Maximum output voltage : 1.8 V (5 dbV) with1 kΩ load
Maximum sound pressure level : (THD < 0.5 %) 135 dB-SPL (P48) with MK 4 & 131 dB-SPL (P12) with MK 4
Low cut filter : 20 Hz, 12 dB/oct
Output impedance : 50 Ω +/- 1 Ω (8 Hz - 50 kHz)
Minimum recommended load impedance : 1 kΩ
Common mode rejection ratio (at 1 kHz) : > 55 dB
Maximum cable length : > 400 m (~1.300 ft)
Schoeps RFI Shield : Yes
Powering standard / Valid range : P48 / 30-52 V & P12 / 11-13 V
Current consumption : 2 mA (P48) & 3 mA (P12)
Output : XLR-3M, analog, 1 channel
Length : 36 mm / ~1.4"
Diameter : 20 mm / 0.8"
Weight : 36 g / 1.3 oz
Surface finish : Matte Grey
Custom colour : Chromagreen, Smoked Silver (Additional Fee + Longer Lead Time)
$1,535.00 + gst
To enquire about this product - click here
The CMC 1 is a small Colette microphone amplifier, about one-third the length and 53% lighter than the CMC 6. It is compatible with all components of the Colette system and can be used in place of the CMC 6 without compromise, for all applications in which the size and weight of the microphone play a role.
At Schoeps, “uncompromising miniaturization” means that the electrical characteristics of the CMC 1 are equal to, or even better than, those of the CMC 6.
The CMC 1 offers very high immunity from RF interference with the Schoeps RFI Shield; high immunity to cable-induced hum and other interference (field tested with Audio Limited A 10, etc.)
A complete Colette-series microphone consists of an MK capsule and a CMC amplifier. All capsules and active accessories of the Colette system are compatible with the CMC 1.
Tech Specs:
Frequency range : 20 Hz-20 kHz
Sensitivity see corresponding capsule
Maximum output voltage : 1.8 V (5 dbV) with1 kΩ load
Maximum sound pressure level : (THD < 0.5 %) 135 dB-SPL (P48) with MK 4 & 131 dB-SPL (P12) with MK 4
Low cut filter : 20 Hz, 12 dB/oct
Output impedance : 50 Ω +/- 1 Ω (8 Hz - 50 kHz)
Minimum recommended load impedance : 1 kΩ
Common mode rejection ratio (at 1 kHz) : > 55 dB
Maximum cable length : > 400 m (~1.300 ft)
Schoeps RFI Shield : Yes
Powering standard / Valid range : P48 / 30-52 V & P12 / 11-13 V
Current consumption : 2 mA (P48) & 3 mA (P12)
Output : XLR-3M, analog, 1 channel
Length : 36 mm / ~1.4"
Diameter : 20 mm / 0.8"
Weight : 36 g / 1.3 oz
Surface finish : Matte Grey
Custom colour : Chromagreen, Smoked Silver (Additional Fee + Longer Lead Time)