AS-84
$2,550.00 + gst
To enquire about this product - click here
The AS-84 is an active combiner/splitter design to use with up to 4 diversity receivers.
With the AS-84 you can:
Choose diversity port (PORT 1 or PORT 2 or PORT 1 + PORT 2), this allows you to do antenna “zoning”.
Choose Wideband or variable narrowband filtration
Activate the DC feed on inputs ports, this is regulated to 12V and protected against overload.
Monitor the power on each channel to manage your reception.
Control parameters on the high contrast OLED display
This device is compact and rugged and build to be used in the field. It can fit your lightweight bag configuration or your cart configuration.
Both active or passive antenna can be connected to BNC. The DC-FEED is current limited and a led display the status on each connector.
The AS-84 is powered from an external DC supply connected to the standard Hirose 4 pin connector.
A stainless steel wire clip is now included allowing 4 positions mounting.
Unused output ports must be terminated with a 50 ohms SMA load.
Specifications:
Wideband Filter 470-700MHz (@-3dB)
Narrowband Filter 50 to 70MHz bandwidth, tunable from 470 up to 740MHz (32 steps)
Gain 1dB +/-1dB
Max RF In +20dBm
Noise Figure Greater than 2dB typ
A/B Isolation 80dB typ
IMD3 32dBm typ
RF Peak Thresholds -5dBm (high); -20dBm (low) (+/-1dB)
DC Feed 12V/200mA; 12V Regulated
DC In HRS4 (-) 1&2 (+) 3&4
Supply 12-18V (75mA typ without DC feed)
Dimensions 83mm x 60mm x 31 mm
Weight 0.25 kg
$2,550.00 + gst
To enquire about this product - click here
The AS-84 is an active combiner/splitter design to use with up to 4 diversity receivers.
With the AS-84 you can:
Choose diversity port (PORT 1 or PORT 2 or PORT 1 + PORT 2), this allows you to do antenna “zoning”.
Choose Wideband or variable narrowband filtration
Activate the DC feed on inputs ports, this is regulated to 12V and protected against overload.
Monitor the power on each channel to manage your reception.
Control parameters on the high contrast OLED display
This device is compact and rugged and build to be used in the field. It can fit your lightweight bag configuration or your cart configuration.
Both active or passive antenna can be connected to BNC. The DC-FEED is current limited and a led display the status on each connector.
The AS-84 is powered from an external DC supply connected to the standard Hirose 4 pin connector.
A stainless steel wire clip is now included allowing 4 positions mounting.
Unused output ports must be terminated with a 50 ohms SMA load.
Specifications:
Wideband Filter 470-700MHz (@-3dB)
Narrowband Filter 50 to 70MHz bandwidth, tunable from 470 up to 740MHz (32 steps)
Gain 1dB +/-1dB
Max RF In +20dBm
Noise Figure Greater than 2dB typ
A/B Isolation 80dB typ
IMD3 32dBm typ
RF Peak Thresholds -5dBm (high); -20dBm (low) (+/-1dB)
DC Feed 12V/200mA; 12V Regulated
DC In HRS4 (-) 1&2 (+) 3&4
Supply 12-18V (75mA typ without DC feed)
Dimensions 83mm x 60mm x 31 mm
Weight 0.25 kg
$2,550.00 + gst
To enquire about this product - click here
The AS-84 is an active combiner/splitter design to use with up to 4 diversity receivers.
With the AS-84 you can:
Choose diversity port (PORT 1 or PORT 2 or PORT 1 + PORT 2), this allows you to do antenna “zoning”.
Choose Wideband or variable narrowband filtration
Activate the DC feed on inputs ports, this is regulated to 12V and protected against overload.
Monitor the power on each channel to manage your reception.
Control parameters on the high contrast OLED display
This device is compact and rugged and build to be used in the field. It can fit your lightweight bag configuration or your cart configuration.
Both active or passive antenna can be connected to BNC. The DC-FEED is current limited and a led display the status on each connector.
The AS-84 is powered from an external DC supply connected to the standard Hirose 4 pin connector.
A stainless steel wire clip is now included allowing 4 positions mounting.
Unused output ports must be terminated with a 50 ohms SMA load.
Specifications:
Wideband Filter 470-700MHz (@-3dB)
Narrowband Filter 50 to 70MHz bandwidth, tunable from 470 up to 740MHz (32 steps)
Gain 1dB +/-1dB
Max RF In +20dBm
Noise Figure Greater than 2dB typ
A/B Isolation 80dB typ
IMD3 32dBm typ
RF Peak Thresholds -5dBm (high); -20dBm (low) (+/-1dB)
DC Feed 12V/200mA; 12V Regulated
DC In HRS4 (-) 1&2 (+) 3&4
Supply 12-18V (75mA typ without DC feed)
Dimensions 83mm x 60mm x 31 mm
Weight 0.25 kg